The Zone Tech cooling seat cushion is easy to use. Simply plug it into your cigarette lighter and a fan will circulate the cool and refreshing air to your back legs and thighs. The air provides comfort and cooling relief. It's nice and warm. The Zone Tech mini heating pad has a warm feeling. The heat relaxes your muscles. Your metabolism and blood circulation are maintained. The Zone Tech mini heating pad uses Far-Infrared heating which is built into the fabric, so no wires are felt. Plug in the Zone Tech mini heating pad when you connect it to your vehicle's DC outlet. The pad can be used indoors. You can connect it to an Ac-to-DC adapter. The Zone Tech mini heating pad has an automatic temperature control unit that can be set to 30 or 45 minutes. The Zone Tech mini heating pad is lightweight and small. It's easy to travel and store it with. The Zone Tech mini heating pad is lightweight and small. It's easy to travel and store it with.
👤This item can warm a lap in a vehicle. The warmth is better than a small dog. The cute little Ken and Barbie California King sized electric blanket was for the price. The control buttons are easy to see and operate for larger people. If you need a light warmer for hands or lap, it's fine for the price. I don't think it's a good idea to use it under a car seat cover or sit on it for long periods of time. A lot of seat warmers are built in. It would not be a good idea for anyone to compromise their own care needs for a child's car seat.
👤The fabric is not the same as the pictures. This is a good value for the price. I don't know what the bad reviews are about and what people think of $16. It warms up very fast. It gets warm. I think it's a great purchase.
👤The pad on my BMW GS 1200 Adventure has been great so far. I've only used it once or twice and my passenger loves it. It allowed us to ride all day, with her sitting on it, in relative comfort for her in the high 30's and 60's. Easy adjustment of temp and plenty of wire to plug and mount, or not, in unlimited ways. The cost to reward ratio on this purchase has been amazing. The heating element is thin, so it's packable. It was very nice to use it in the cold weather of the lake.
👤The section I taped off contained a very thin flimsy fleece material. Tag says "please see included instructions for further details", but no further information is given. Poor quality product leads to waste of money.
👤The accessory outlet was installed on the garden tractor. I use a tractor to plow snow. I have tried other seat warmers, but this one works better. For the price, they are very sophisticated. I ordered a second to have on hand because I was so impressed. Great value.
👤The buffalo print that came with me was black and red, not the black shown without warning. Not impressed.
👤I bought this to keep the worst chills off. It is adequate for that. I don't know about all the zones shown in the ad.
👤I tested the item the day I received it, but it didn't work with my phone. Don't waste your time. I came back the next day.
Don't waste time buying and returning parts that may or may not be compatible or safe to use together, it's advanced made easy. Breathable,Dampproof,Universal Four Seasons, Insulates your body from burning hot seats in the summer and freezing cold seats in the winter for a comfortable driving experience in any weather. The unique bottom elastic and close design greatly enhances the compatibility of various vehicle seat sizes. The appearance is beautiful. The Full Wrapped Edge of the bottom provides better protection. The car seat covers look like the original seat. They will protect your seat. The non slip bottom is not easy to move and is made of anti-skid high-grade fabric. The small waist design of the front seat bottom cover will not affect the use of the airbag. 2 minutes after watching the video, it's easy to install. The installation requires 3 steps, which include hanging two metal hooks under the seat, clip the two chucks on the seat back, and fix the clips on the back cover and headrest cover. 2 minutes after watching the video, it's easy to install. The installation requires 3 steps, which include hanging two metal hooks under the seat, clip the two chucks on the seat back, and fix the clips on the back cover and headrest cover.
👤These are great. They are a nice thick weight, the fabric feels nice, and they are easy to adjust to fit your seats. They helped me improve my older Mazda Tribute that was starting to get scratches in the vinyl, it should have been done years ago. I didn't expect them to fit as well as they do, and was pleasantly surprised. I wear a lot of dresses and leggings, and I think they will help protect my legs from the hot or cold seats.
👤Installation was easy. They look nice. I removed the head rest covers. They are not as cool as cloth, but they are not as uncomfortable. I was expecting them to be more airy. More like clothe. I think they're a type of vinyl.
👤I had no problem installing these seat protectors. The head rest covers are very easy to put on. I'm leaving them off for now, but I might do it in the future. If you want to call it that, I couldn't connect the hooks to a rod underneath the front seat. My rods were too big for the hooks. They are perfectly functional. The seat covers are in place. I like the material. They are nice in appearance. I got the beige and it goes well in my car. If that's the case, I have a 2015 car.
👤The seat cover is very nice. I was not expecting it to be that nice. The two little pockets at the front are great for storing my stuff. I gave it 4 stars because of a couple reasons. I bought this because they said it fits 95 percent of vehicles, but it's not true. It's not a perfect fit for a full size vehicle, and I was able to get my seat stuffed into it. My other complaint is that the attached head rest has no adjustment. It doesn't take 888-353-1299 There are two very minor flaws that are not a deal breaker. I could not do without the cover. This is a great cover. It looks like plastic, but it's actually a soft fiber that's woven into an interesting pattern. I bought it to keep my leather seats warm in the winter, but it works well and my seat heating works fine. I'm tall. I don't want a seat cover that makes me sit higher in the seat. This one is very comfortable for a tall man.
👤I needed the seat covers for my 2005 Ford F-150. After 16 years, the seats looked rough. The covers were perfect. They were easy to install. I didn't have to worry about the seat belt coming out of the top of the seat because they fit perfectly. I like the material. They are comfortable and well made. In the hot Texas heat, they are important. I don't usually write reviews, but I highly recommend these seat covers. The quality is much better than the cheap stretchy kind that doesn't fit or look right. I didn't need the rest covers.
The package includes 13 pieces, including a front seat cover, a rear backrest cover, an armrest padded with a zip and a head pillow. Please contact them if you have any suggestions or requirements for the FREESOO car seat covers set. It is possible to adjust. The seat cover is suitable for almost all sedans, SUVs, vans, and electric vehicles because the straps used to secure the seat are resistant and need to be tightened during installation. The material is material. The product is made of faux leather, which is scratch resistant. The biplanes are comparable. The side straps for fixing the seat pillow cover are almost hidden. There is enough room for the airbag to stretch. There are pockets in the front seat back. It is easy to clean with water. The car seat cover can be wiped with a wet towel. It's very convenient. The wear resistance of the button is excellent. It is easy to install. It is easy for beginners to follow the steps in the installation guide and install in 25 minutes. After proper installation, it will never slide. It is easy to install. It is easy for beginners to follow the steps in the installation guide and install in 25 minutes. After proper installation, it will never slide.
👤The front set of the jeep wrangler works well. Nice fit. It was unacceptable to back set. They hang over the base with no way to correct it. Even if it was installed correctly, they don't have the same tension straps that the front has, instead just one that goes under the corner on each side. I got the front set after my return was accepted by Amazon.
👤I own a Honda HRV EX. They fit the front seats well and the back seats were difficult to figure out. The seat covers work with them, but you have to put a bit of pressure on the seats as they lock them in place. It is important to check out the videos on the listing for directions. The quality and fit of the car was perfect. No one realized it was seat covers.
👤Installation took about 30 minutes. The instructions were written in a language that was not English, so expect to use your brain a bit, but a couple things weren't mentioned. I think they add a little bit of cushion to the seat. Some people complain that the pieces were loose after installation. You can lower the slack by wrapping some of the straps. I had to do this with the rear seat cover. You have to be aware of where you put the hooks. If you want to eliminate any slack, you need to look for a small hole at the end of the seat pan. I'm sure you can fit these on most vehicles if you are patient and resourceful.
👤I was going to love them when I got them. One of the straps broke when put in, but it was replaced quickly. I disliked these seat covers so much that I had them in my 2020 MDX with the 3rd row. They don't stay put. When I first put them on, they looked like my original leather seats, but you couldn't tell they were seat covers. The anchors don't stay put on the middle row, which brings me to #2. There are two more I don't think these are meant for a 2020 MDX or anything where the seats will be put down, slid, adjusted, etc. The cheap, plastic anchor will come loose if any of the above is true. When I return from vacation, I will try to find an alternative method to keep this in place. There are 3 more The back seat covers in my car are supposed to be sewed together. If you need to easily access the 3rd row, it's not ideal. I regret buying them. If I could do it all over again, I would send these back and save myself $200.
👤I read all the reviews before buying it. I made a huge mistake in getting clothe seats for my traverse, so I was excited to get this. I did the front seat in less than 10 minutes and then did the back seats in 30 minutes or so. The cover on the seats got messed up when I pushed the seats forward to go to the third row. It didn't look good and I was disappointed. It looked cheap. I wanted to look like it belonged to the car. When you tried to move the seats, the strings snapped right off, and I made sure it was all out from the back so it wouldn't be easy to come off. But it did. It was a waste of time. I didn't know if I should continue looking. My sister said she has one that looks like it came with her car. I can't find it. I will be buying more until I find the right match.
If your steering wheel has a leather cover, you need to remove it before you can fix it. It was designed to cool the grow rooms, transfer heating/cooling, and exhaust odors. The temperature and humidity are programmed with minimum speed. You can use their app to access advanced programs, alarms, notifications, and view climate data. A quiet and energy efficient performance can be achieved with a mixed flow design and an EC- motor. The dimensions are 7.9 x 12.6 x 8.4 in. Airflow: 402 CFM, noise: 32 dBA, and Bearings: dual ball.
👤The controller is great. The controller seems to be able to control multiple fans, however I don't see where you can get a single fan without the controller. The build quality is great, the packaging is nice, but I wish it had some anti-vibration technology in the mount because the fan is quiet, and it does resonate through whatever it's connected to. I have a server room in my home that is mounted to a floor joist, and when you run it full blast in free air it makes little noise, but it is attached to my floor joist, and it sounds like there is a vacuum in our foyer. I think the "Smart Mode" could be a little smarter than it is. In smart mode, you set a desired temperature and then set a temp range between 2 and 4 degrees. If the maximum operating speed is 3, and you have a 4 degree range, and have the thermostat set at 78, then at 70 it would be running at speed 1, 74, speed 2, and 78 or greater. If you hit 74 degrees, you go to speed 2 and then if you come back down to 73, you go to speed 1. The end result is that the fan goes from being hot to cold in a few seconds, then back up again, then back down again, and then back up again. White noise can be ignored, but a constantly changing fan with only 4 or 5 second gaps is a huge annoyance and makes me forgoe the smart mode altogether. There are temp thresholds on a home thermostat. The hum from the fan became annoying despite using anti vibration mounting hardware. The fan unit was suspended using four short bungee cords. The unit is suspended in the middle of the space trapped between two bungee cords after two people went under it. This has resulted in almost zero hum and vibration noise being transmitted to the floor and has quieted the unit down.
👤I've been looking for a DC motor speed option. It was purchased when I found it. Most speed controllers use an AC motor for power, but PWM doesn't waste it in the form of heat. The furnance market has efficiency/comfort gains. DC blower fan motors are the main difference between the high and low end lines. I bench tested the power consumption with a kill-a-watt meter after unboxing this. The chart is attached to my review. I recorded noise via a phone app, but this was an open air test from the unit, and the noise was dominated by the wind. The noise testing was not accurate, but it was uniform. Great fan! I would like to see this fan sold as a power supply in applications where a person has external controls. I don't need a nice display or more electronic pieces that could fail. Simple is usually the best. Please consider selling a single speed power supply and fan combination with no fancy control panel.
Their seat covers are designed to fit most vehicles. You can see their images for fitment examples. There may be more work required to create a perfect fit. Drop Stop has 100% Gap Coverage in front of the seat belt catch. Drop Stop can be attached to the seat belt catch via a built in slot and can move with the seat. Drop Stop blocks a dangerous gap between your car and truck seat. Drop Stop is Patented and Original. Drop Stop will last a lifetime. Each package has 2 Drop Stops, one for the driver side and one for the passenger side. You also get a slide free Pad and a credit card light as bonus gifts. Most vehicles have one size. Drop Stop can be expanded orcontracted to any size you need. One color blends all. The Gap is a dark shadow so once you install Drop Stop, you won't know it until it stops the Drop. Most vehicles have one size. Drop Stop can be expanded orcontracted to any size you need. One color blends all. The Gap is a dark shadow so once you install Drop Stop, you won't know it until it stops the Drop.
👤I had high expectations for this based on the reviews and the problem that it is supposed to solve. $20 is a lot for two small stuffed pillows. The profit margin on this must be crazy. It was easy to install. I put one in each of the seats of our cars. The stitching on the second Drop Stop ripped open completely after I installed it. See the pics. I didn't use much force to get it in the car, it seems to be of poor craftsmanship. If you adjust your seat up and down for multiple drivers, it does seem to fall down quite low, which I thought was the problem it was supposed to solve. I did not hear a word from the company after I contacted them. I'm posting this review now.
👤I'm not happy that I have to give this product one star. I have a Honda CRV that does not fit in the gap. They made it difficult to place them in the gap. I worry that the motor might burn out, that's how difficult it is to move the seat with the filler in place. I've been able to remove one but it's difficult to remove the other. I'm going to have to cut it open and take the filling out at the same time. This was a complete waste of money and I regret buying them.
👤I thought the product was a good solution, even though I knew it was overpriced. Emails to customer service go unanswered because of the poor quality.
👤There is nothing special about this device. You could take a hand towel, roll it up, shove it in the gap and use it for the same purpose. It isn't long so it doesn't run the full length of the seat as needed. You really can't stretch it. The little credit card flash light was cool until you realized who would want to carry it around with them. It's true! The sticky pads don't work well. It can either stick to the phone or the surface. The pad sticks to the one that is better. My phone came off the console armrest after I stuck it to my back. In the trash!
👤My cellphone fell down when I bought a new Toyota Tacoma because of the hole in between the seats. I don't drop my phone anymore after putting the drop stop in place. You can't even tell it's there. Even though my car seats are gray, no one knows they're there. They blend in. You move the seat. My wife is 5'5" and I'm 6'1". We are moving the seats and they are moving with us.
👤It fits well in my year. I haven't had the chance to drive it yet, but I already love it. Nothing will slip through the snug fit. I was worried about it getting crowded up when the seats were moved. It moves well with the seats. The driver side hangs over the side of the seat, which is shown in the pics. I'll probably buy one for my husband now that I like it.
The Zone Tech Wood Beaded Seat Cushion is double the advantage. It is now in a pack of 2 at an affordable price. Don't miss it! The company provides concierge services. The seat cover from Zento Deals is Natural Royal Wood Bead. The wooden bead seat makes you feel like someone is massaging your back. You will feel more at home on the couch. Good governance. The Zento Deals Natural Royal Wood Bead Seat cover allows the air to circulate in and out of your back. The fresh feeling you get from home will stay with you until you reach your destination. On an hour long drive or sitting, there is no sweat. The wood beads seat cover will release tension and make a day stress free. Durability. The Zento Deals Natural Royal Wood Bead Seat Cover is made of high quality wood beads that will keep your chair fresh. The wooden beads are sturdy and will last a long time with the help of the wire interlaces. It's easy to install. The Zento Deals Natural Royal Wood Bead Seat Cover is very easy to install. Attach elastic to your chair and you are good to go. Universal fit. The Zento Deals Natural Royal Wood Bead Seat Cover is perfect for cars, vans, trucks, even for an office chair. It will fit in the palm of your hand. Universal fit. The Zento Deals Natural Royal Wood Bead Seat Cover is perfect for cars, vans, trucks, even for an office chair. It will fit in the palm of your hand.
👤When I received this product, many of the wooden beads were already cracked. Within 2 weeks of use, many of the beads have fallen off. If you look at the photos of the product, you will see that many of the beads are already cracked in the new product. I should have looked at the photos that were advertised to see the cracked beads. I should have taken that as a red flag that this is not a good product because the product only has a 3.7 stars rating. I realized that this is not a good product. I hope the readers don't make the same mistakes that I did.
👤My husband said it was the bomb, but this thing doesn't look like much. The size ratio is off because he put it on an RV seat. The intent was to keep him comfortable and cool. We almost bought a more expensive one, but it didn't go all the way up the back of the seat, which appealed to him. He was afraid that would happen. It is definitely worth it for the price and we would buy it again.
👤I have been using the bead seat covers for a long time. The price was reasonable and it looked like it was the same as before. I bought one. The quality was not up to par. Many of the beads are cracked and have splinters on them. The beads are held together with a single strand of medium weight fishing line unlike other brands that use 2 lines which are heavier weight. You should look at other people before giving money to this product.
👤A lot smaller than you think. The one in the pictures is larger. The rubber band is too small to fit. The width is too small.
👤The user is on the RV captain seat. The elastic was not long enough to go around the back of the chair. The 4700 mile trip was more comfortable because of this product. It needs about 6 more inches added to the elastic to fit my seats and not cause stress on the seams.
👤It looks good and seems comfortable. It's small for the cars in the US and I drive a compact car. I'm guessing it's a manufacturer in Europe or China that makes small things. If you buy it for a small chair in the house, it should work. If you want to fit the elastic band around the car in your vehicle, it needs an extension. I was hoping it would be a better fit for my vehicle, but I had to return it. I got free 2-day delivery and the return was also free with my Amazon Prime account.
👤I have it on my computer chair as I write my review. Simply slide the elastic band over the chair back to the mat, and you're good to go. It beats sitting on a seat all day.
👤The strap is supposed to hold the upright part of the seat cover in place. It is too short. The elastic on the back of the seat is too short in my Toyota Camry. I'll probably extend the strap. Don't order this item if you don't want to go to that trouble. It would be easy to make the strap longer.
Accommodates an infant car seat. It was designed to circulate air, exhaust odors, and cool AV racks. An 8-speed manual controller is included. See the T-Series for humidity and temperature controls. A quiet and energy efficient performance can be achieved with mixed flow design and an EC-powered motor. The kit includes a corded AC power adapter. The dimensions are 7.9 x 12.6 x 8.4 in. Airflow: 402 CFM, noise: 32 dBA, and Bearings: dual ball.
👤7 watt on low setting and 37 watt on high setting. All eight settings work. Absolutely quiet. It was easy to mount. The value is great. I have many in-line exhaust fans and this is the best. The same air movement is achieved with 1/6 the watt. One of the highest quality products I have ever bought. I will be rating this after installation. I think this unit will last. If it does not, I will change my rating.
👤When making products, they should meet the 6 inch duct diameter standard. The fan does not connect to standard duct tubes, flexible duct or their own carbon filter. I was disappointed with the experience of installing the fan. I had to wrap the fan end with 2 sided tape multiple times to make up for the difference between the ends. It should be a snugg connection. The fan ends are about a quarter of an inch shorter than the standard 6 inch duct. I don't have time to deal with waiting for a new product to be delivered so I didn't return it.
👤I spend over $100 on a duct fan because I read reviews that say it is very quiet, and many have stated that. Unless I received a bad product, I think I know what I'm talking about. The duct fan is loud. I mean 32 decibels is a joke. It sounds like a jet engine is starting to warm up. I can't go up half way without hearing it in the living room. My house sounds like it's going to take off if I set it to 8. The sound of it is ridiculous and I am going to return it.
👤The fan is more quiet than I expected. I've spent the best 99 dollars. I was hesitant because of the price. I have never spent more than $25 on a fan. If you need a quiet fan, this is it. I am very happy with this purchase. The quality far exceeded my expectations. This is not cheap imported Chinese stuff. Solid build. It looks nice. You can't hear this thing, I've turned it up to the highest speed inside my 4x4 grow tent. I put it up to my charcoal filter in the living room to see if it worked. I couldn't hear it in my living room, so I wasn't sure if it was on. Don't let it fool you, this thing can move air. It doesn't sound like it at all. When they say this fan is quite, they are not joking. I would buy another one. This is worth the money.
👤I use this fan because my south-corner room has no air circulation and the windows don't allow for good air circulation. This makes my room so bad that I can't sleep. The styrofoam supports that the fan come with fit perfectly together to form a seal in my window. After fitting a duct-collar through one of the styrofoam blocks and setting up the ducting, my room doesn't smell, my nose isn't stuffy, and it's way more comfortable in my room. I'm considering buying another for use as an intake. It comes with a 10-speed controller, which has an extra long cord, and I'm surprised at how quiet the lower speeds are. It gets loud after halfway to max speed. I am happy I did this project because I love it and it has made my room more comfortable, after months of research I can easily say that it was worth it.
The improved series is stronger and more durable. Air flow between your body and the vehicle's seat material is offered byventilated design. 30% more coil spring for added comfort. The neutral color matches many interior designs. The standard size fits most bucket or bench seats and works great for office or desk chairs as well. The standard size fits most bucket or bench seats and works great for office or desk chairs as well.
👤The quality of Comfort Products is not worth buying anymore. 1. They switched to a quick-to-deteriorate, thin, weak, black "fabric" on one side instead of the heavy duty open weave fabric on both sides that had been manufactured for decades. The cushion is no longer changeable. The cushion is only half of its useful life, not taking into account how quickly the thin black material on one side starts coming apart. 2. The use of closed fabric on the top side of the churchyard has plummeted to useless. It is supposed to be a cushion made of water. The seat side material was purchased in 2017: The weave of the top side material was still close enough to the material that I have been using for over 50 years. The fabric on the top side is of closed weave, which is not good for the cushion because it has no ventilation. The black and blue are the top side fabrics. The rule is inches with 1/16 inch divisions. 3. The fabric is made of paper. Paper thread can't hold up as well as nylon or polyester. Cotton fabric made of 6 cord or 8 cord thread would be better than paper. 4. The internal wire frame is okay, but I will not purchase any more from Comfort Products unless they start making cushions again with nylon or polyester fabric, which allows for circulation to occur. The feedback form with less than one star would not be accepted by Amazon.
👤The cover is made of paper. No wonder they are destroyed in no time. The last time I bought a ventilated cushion for a vehicle, they looked like this one, with steel springs, and a woven nylon cover, and looked just like this one, from the photos of it anyway. When I received this one, I was surprised to find that the cover is made of PAPER. Yes, paper. I have included a photo of the packaging. They are disintegrating in a matter of months. The nylon edging and steel frame are not in the specifications posted. The original ones had woven cover material on both sides, this one has a flimsy back type material on the bottom, which will tear quickly. My old seat was made of nylon and not paper, so it lasted a long time. This one is going back to Amazon.
👤It doesn't add support. It doesn't make the seat more comfortable. You are sitting on a bunch of metal coil springs wrapped in paper and other material. If you're still reading, you're wondering why this guy gave it five stars. I will tell you why. This device would be Batman if butt sweat was the culprit. Being stuck in a vinyl seat in the summer keeps you from being miserable, and the a/c can get under and behind you to keep you from being miserable. I need several years of use out of each one, this is a necessity for me at work. It helps keep your rump warm in the winter by allowing warm air to circulate. It's not magic, but it beats out the unpleasantness of vinyl and I don't think it makes the seat any less comfortable. I wouldn't use it on cloth seats because they're already soft.
The best choice is the Breathable car seat cushion cover, made of activated healthy material, sponge of high elasticity, heat-insulated cloth, keep hip comfortable in long time use. It's nice and cool. The Zone Tech cooling seat cushion protects you from the intense summer heat and protects your seat from cracking. The Zone Tech cooling seat cushion has an ability to circulate air through the hundreds of tiny spaces in the Microfiber and mesh materials. The seat cushion puts a layer between your body and your car's upholstery, leather or vinyl, instead of the pockets of hot air that turn your car into a sauna. The cool air flow from the cushion reduces body heat and makes riding in hot weather more comfortable. temperature control The zone Tech cooling seat cushion has its own temperature control. The dial can be turned from high to medium to low depending on the temperature in your vehicle, the weather outside and your personal preferences. Universal fit. The Zone Tech cooling seat cushion is universal. It's attached to your car truck, SUV or even RV with straps. The Zone Tech Cooling Car Seat Cushion is a thoughtful gift for work commuters, road travelers, taxicabs or any car owner. The Zone Tech cooling seat cushion is easy to use. Simply plug it into your cigarette lighter and a fan will circulate the cool and refreshing air to your back legs and thighs. The air provides comfort and cooling relief.
👤The cushion was easy to install and didn't block the seat. It keeps the chair cooler since my chair is leather, and anything over it would be cooler. The air moves on the bottom and back of the chair. Airflow isn't that great. It keeps my back from sweating. If I want more air in the back, I sometimes sit up straight and lean back on it. The chair is more comfortable with the fan off. The fan is very loud. I'm willing to live with it in exchange for a cooler chair, but others may not like it. It's as loud as my A/C fan.
👤It works as well as my previous seats. This time, my car didn't have an option. I owned a Jeep and a Chrysler. I had to give up something. I am very happy that I got this car. I have a car. The center console has a power outlet. This was only $35. I would still be happy even if it only lasts for a few trips. I only use it for long trips.
👤I bought this for my car. I had a sweaty back and bottom in the summer because I was tired of long drives. This has been a blessing. I've tried several other covers, but this one is the best. Several members of our Corvette Club have purchased this recently based on recommendation and seeing mine in action. Turn your AC on to the feet on hot days. Cool air can be sucked in and blown through the seat cushion with the fan at the bottom. I will buy a second one for the passenger seat.
👤It's loud even on the low setting. I only notice it when the windows are open. I'm moving. You can still hear it. It's louder than your A/C at max and it's unbearably loud on low. I can hear it over the music. It works very well. They put a cheap fan in there.
👤I drive more than 10 hours a day. This cushion makes my life easier. The noise is worth it compared to the coolness it brings. It is highly praised.
👤The chair mat is a great idea. This one doesn't work. Unless you're over 6' or don't mind sitting with your legs gapped, just keep looking at the fan. This only cools the center of the seat.
👤I couldn't install it, it was confusing. This isn't meant to be a support for cool. It is rough to the touch and not meant for comfort. I felt cool because the cooling fans worked.
👤I bought these for someone who didn't have an AC in their car. It's not cool because the holes are covered by your body and it's just air coming out of them. I didn't try that because they would probably be OK for the heat function.
There is a 100% lifetime money-back guarantee. Their LIFETIME UNCONDITIONAL Free Replacement or Money Back Guarantee is what they are committed to. If you're dissatisfied with their car trash can, you can contact them for assistance. It's nice and cool. The Zone Tech cooling seat cushion protects you from the intense summer heat and protects your seat from cracking. The Zone Tech cooling seat cushion has an ability to circulate air through the hundreds of tiny spaces in the Microfiber and mesh materials. The cool air flow from the cushion reduces body heat and makes riding in hot weather more comfortable. Premium quality. The zone Tech cooling seat cushion is made with high quality materials and components to ensure it lasts for a long time. Universal fit. The Zone Tech cooling seat cushion is universal. It's attached to your car truck, SUV or even RV with straps. The Zone Tech Cooling Car Seat Cushion is a thoughtful gift for work commuters, road travelers, taxicabs or any car owner. The Zone Tech cooling seat cushion is easy to use. Simply plug it into your cigarette lighter and a fan will circulate the cool and refreshing air to your back legs and thighs. The air provides comfort and cooling relief.
👤The appearance, feel and function are all good. When I installed it, it was found that the air flow was bad. The front flap straps were pulling too tight and restricting air flow. I used some string to add 5 inches to the straps and the issue was solved. The inline switch on the power cord was included with the product.
👤The thinner width size is better for my high bolster seats. Air flow is good to cool the back and bottom of the body. I am debating whether or not to return for a refund. There is no on-off switch. One plugs it into a 12V port. My plan was to use an extension cord to the rear cargo area to free up one under the dash. Without an on-off switch, I have to stop the vehicle, open the rear hatch and plug in. It's annoying when on the highway. 2. The fan only blows on one high setting, making it loud and obtrusive. I can't find a way to adjust fan speed for those times when I am driving on surface roads.
👤Put the air intake up behind your neck, not under your knees, if you need cooling air on your back. If you want the fan intake to be behind your neck, you should flip the unit upside down. The air won't travel to your back if you don't have that. Unless you have a cigarette lighter outlet in the rear seat, the cord barely reaches this way. I can feel the air on my back through my shirt. I drive all day in Florida, so my back gets hot, hopefully this device will last a long time.
👤Whoa! This is wonderful. I don't like the leather seats in my car. It would be a nightmare in NC during the summer. I found this in time. Great idea. The air flow is great from the calves to the shoulder blades. I'm 5'5".122 lbs. and average height is 5'5". Plugging/unplugging to turn it on/off is the only thing I would change. If it makes it through a full summer in NC, I'll be happy. I was happy to find a product like this. I will try to remember.
👤I wanted the seat cover to work for me. The seat cover was close to resolving the issue with my Mazda MX-5, but came up about 4 inches too short. The seat cover looks decent, it blends well with black leather seats, and is decent in build quality. The big problem is 1. The seat cover is too short. The fan is on top of the seat. It should hang in front of or below your seat to work the intake air. I sit mostly upright in my car because it has relatively standard length seats. The middle and upper part of the pad are too low if the seat cover is slid down. Since the cover wasn't meant to be positioned this way, there is restricted air flow to the upper part of the seat cover. The fan is noisy and buzzy. It appears to be a standard 80mm PC 12V PC intake fan. A better fan is probably what one could replace it with. Unfortunately, returning the seat cover for reasons 1 and 2.
Money back within 90 days. The warranty period was from the date of purchase. If you have a problem with their item, you are covered by their guarantee. You can order it from CAR PASS. The water isROOF NEOPRENE This seat cover is made from a material that doesn't absorb liquid and will bead up on the fabric if you spill it. The seat cover and the headrest cover are constructed of the same waterproof and sweat-proof materials so you get the same protection across the entire seat cover. It is easy to install. The two-piece seat cover is one of the practical solutions designed by the company. You don't have to worry about installing this one-size-fits-most cover because you just slide the cover into place along the edges of the seat. There is a 92 percent fit of cars. No more guessing! Most car makes and models are compatible with the Wetsuit Seat Cover. There is no need to buy a different seat cover for each car or shop by brand. You should not have to go to the car wash every time something spills in your car. If your coffee lid pops off and spills over, you can simply toss the car seat covers in the washing machine. You should not have to go to the car wash every time something spills in your car. If your coffee lid pops off and spills over, you can simply toss the car seat covers in the washing machine.
👤I looked at the list if it had a warning and it didn't. It had one on the box when it found the item. They looked nice, so that makes me sad. The box was returned the next day. This is listed on the list. I did research on neuperene to see if it causes cancer, but I didn't find anything. I decided not to buy any more. The seller needs to warn people who shop from California about the dangers. The car seat covers.
👤If Good Year wants to promote their product, they should lower their price and pay me to display their logo. It's seriously. If it wasn't for the bright yellow Good Year on the left side and another Good Year tag on the right, this would have been a mediocre 4 stars. I thought it was part of a copyrighted picture. They never thought they'd label each seat cover with their name. The design is hiding. No woman came up with this design. You should have just left the one tag with your logo on the road and done away with the yellow stitching on the left to gray or black, instead of changing it. Why should I pay to promote something? The product was not free. I don't like the large yellow lettering. It looks ridiculous.
👤There is a review for a pack of seat covers. It was easy to install the covers. The covers fit perfectly. I don't believe they will be water proof since they are still made of cloth material, but they look and feel like they will be resistant to liquids if you can get it wiped up quickly. Very happy with the purchase.
👤It fits! People, listen up, you bucket seat people. I needed some protection. I have spent a lot on covers that don't fit. I know I am not alone. I put these in a 3500 and moved them into a 350 because it was about to go into the field. I was surprised that they fit. Trying to fit a car is one thing. I thought the Ford was a lost cause and the last covers were so snug that they reformed the leather with folds. There is a They did more damage than good. I put these on after a few days and they are still holding and have straps to make sure they stay. The padded one is just as good, but my butt heater is not as good because of the padding. The Chevy seat was a lot more comfortable.
👤Products arrived on time. The under strap is always a pain, no matter who's cover you buy. My car is perfectly fit. Look great. Pick up your tail when exiting the vehicle, it will slide a bit if over leather seats. Try to stay in the seat. The air bag tags are a contrast to the black color of the seat covers. I guess the logos are okay.
👤There's no instructions for installation, and there's an elastic on either side that has something on it. I'm not sure how one affixes this part because there's no part of the seat that's narrow enough to have the straps meet comfortably, and if you pull it too far, it snaps immediately. The last seat protector had the same thing happen. Otherwise, it's fine. I want my seats to be covered. Some may not like it, but it covers the seatback pocket. There are bumps and ridges that stick out because it isn't specifically for my car. It's good enough.
Car seat ventilation kit products from Zone Tech. In this article about car seat ventilation kit you can see why people choose the product. Auto Newer and Aierxuan are also good brands to look for when you are finding car seat ventilation kit.
Zone Tech, Auto Newer and Aierxuan are some of the best brands that chosen by people for car seat ventilation kit. Find the detail in this article. Ac Infinity, Drop Stop and Zento Deals are also brands that their products are worth to check.